20
www.aeg.com
• Remove shiny metallic
discoloration: use a solution of water
8. TROUBLESHOOTING
WARNING!
Refer to Safety chapters.
8.1 What to do if...
Problem
You cannot activate or oper-
ate the hob.
Residual heat indicator does
not come on.
There is a dark area on
the multiple zone.
You cannot activate or deac-
tivate the outer ring.
8.2 If you cannot find a
solution...
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre. Give the
data from the rating plate. Make sure,
you operated the hob correctly. If not the
9. TECHNICAL DATA
9.1 Rating plate
Model HE604060XB
Typ 60 CAD 55 ZO
Ser.Nr. .................
AEG
with vinegar and clean the glass
surface with a moist cloth.
Possible cause
The fuse is blown.
The zone is not hot because
it operated only for a short
time or the sensor is dam-
aged.
It is normal that there is a
dark area on the multiple
zone.
Electronics may be dam-
aged.
servicing by a service technician or
dealer will not be free of charge, also
during the warranty period. The
instructions about the Service Centre and
conditions of guarantee are in the
guarantee booklet.
PNC 949 595 050 01
220 - 240 V 50 - 60 Hz
Made in Germany
7.0 kW
Remedy
Make sure that the fuse is
the cause of the malfunction.
If the fuse is blown again
and again, contact a quali-
fied electrician.
If the zone operated suffi-
ciently long to be hot, speak
to an Authorised Service
Centre.
Call an Authorised Service
Centre. Do not use the
zones until they are repaired.