Power Supply; Handover; Maintenance; Specification - wodtke FEEL WARM IR 300 Instructions De Montage

Chauffage radiant infrarouge
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 22
Installation • Handover

9.3 Power supply

WARNING Electrocution
Carry out all electrical connection and installation
work in accordance with relevant regulations.
Material losses
!
The specified voltage must match the mains voltage.
f Observe the type plate.
f
Material losses
!
This appliance is unsuitable for fixed electrical cables.
f Connect the appliance to a suitable socket.
f
Note
The power cable must only be replaced (for example if
damaged) by a qualified contractor authorised by the
manufacturer, using an original spare part.
The appliance is delivered fully wired. The following electrical
connections are permissible:
Connection to a freely accessible standard socket with
matching plug
Permanent connection to an appliance junction box
with earth conductor
9.3.1 Connection to a standard socket
f Plug the appliance into a standard socket.
f
Note
You can push excess cable back into the space be-
tween the rear panel and wall.
9.3.2 Permanent connection
WARNING Electrocution
In the case of a permanent connection, the appli-
ance must be able to be separated from the power
supply by an isolator that disconnects all poles with
at least 3 mm contact separation.
Material losses
!
- Trim the power cable so it leads directly to the ap-
pliance connection socket.
- Ensure that, after trimming the power cable, the
appliance can still be removed from the wall with-
out a problem.
f Trim the power cable by cutting off the plug.
f
f Connect the power cable to a suitable socket.
f
© wodtke GmbH - Tübingen.

10. Handover

f Explain the functions of the appliance to the user. Draw
f
special attention to the safety instructions.
f Hand over the operating and installation instructions to
f
the user.

11. Maintenance

The appliance contains no serviceable parts.

12. Specification

12.1 Dimensions and connections

IR...300-900
X
X
a10
Appliance
a20 Appliance
a30 Appliance

12.2 Minimum clearances

≥100
IR_BA_190726
a20
IR...300
IR...500
Height
mm
600
600
Width
mm
600
1000
Depth
mm
49
a30
IR...700
IR...900
600
600
1400
1800
49
49
49
≥100
Page 18 / 64

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Feel warm ir 500Feel warm ir 700Feel warm ir 900

Table des Matières