Led Status - Magnat CS 10 Mode D'emploi

1.2 Rear
DC IN
•
SET ( RESET/ WPS Mode): Press briefly to activate WPS mode; press and hold for about 5 sec. to
restore the speaker to the factory settings.
•
DC IN : Socket for mains power adapter. Connect the power adapter to power on the system
automatically.
•
AUX-IN: Audio input, 3.5mm stereo socket
•
Battery ON/ OFF: When operating w/o a power adaptor, switch OFF to save the battery power and
switch ON to power on the system.
•
LAN: Ethernet LAN connection to connect your speaker to a LAN port of a router instead of WLAN
network.

1.3 LED Status

Button/LED
STANDBY
Battery Low Power
AUX IN
SET
WLAN
VOL -/+
MUTE
1.4 LED on the rear to show battery charging status
LED
Charging indicator
DC IN SET AUX LAN
OFF
AUX IN
Display
Lights up Red
Flashes red
Lights up Orange
Flashes Green/Blue
Slowly
Flashes White
Lights up solid White
Flashes
Flashes Slowly
Display
Flashes red
Solid red
Off
WLAN
Desktop TV MP3/
Smart phone
Status
Standby mode after 15mins w/o any audio signal
inputs
Battery low power w/o DC adaptor connected
Connected via LINE-IN
1. Reset to factory default
2. Firmware update
1. Booting process
2. WPS is processing
1. System is ready for WLAN connection
2. Play Modus
volume increase/decrease
Mute
16
Status
Battery Charging
Full Charged
Unplug DC adaptor