Philips ErgoFit FC9269 Mode D'emploi page 17

Masquer les pouces Voir aussi pour ErgoFit FC9269:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 104
2
Grab the release tabs of the HEPA filter cover to open and remove
the filter cover.
3
Take out the washable HEPA 13 filter.
4
Rinse the pleated side of the HEPA 13 filter under a warm slow-
running tap.
-
Hold the filter in such a way that the pleated side points upwards and
the water flows parallel to the pleats. Hold the filter at an angle so that
the water washes away the dirt inside the pleats.
-
Turn the filter 180° and let the water flow along the pleats in the
opposite direction.
-
Continue this process until the filter is clean.
Never clean the washable filter with a brush.
Note: Cleaning does not restore the original colour of the filter, but does restore
its filtration power.
5
Carefully shake the water from the surface of the filter.
6
Let the HEPA filter dry completely.
7
Place the dry HEPA filter back into the appliance.
English
17

Publicité

Table des Matières
loading

Table des Matières