Brush Attachment; Remote Control Operation - Philips ErgoFit FC9269 Mode D'emploi

Crevice nozzle, small nozzle and brush attachment
1 Connect the crevice nozzle (1) or small nozzle (2) with or without
brush attachment directly to the standard handgrip or to the tube.

Brush attachment

1 To assemble the brush attachment, slide it onto the bottom of the
small nozzle ('click').
2 To disassemble the brush attachment, slide it off the bottom of the
small nozzle.
tri-active nozzle
1 Use the hard floor setting to clean hard floors (for instance for
tiled, parqueted, laminated and linoleumed flooring): push the rocker
switch on top of the nozzle with your foot to make the brush strip
come out of the housing. At the same time, the wheel is lifted to
prevent scratching and to increase manoeuvrability.
2 Use the carpet setting to clean carpets: push the rocker switch again
to make the brush strip disappear into the nozzle housing. The wheel
is lowered automatically.

remote control operation

- The remote control has three buttons (specific types only) or four
buttons (specific types only) with which you operate the vacuum
cleaner.
English
11