Philips ErgoFit FC9269 Mode D'emploi page 21

Problem Possible cause
The appliance The dust bucket and/or
does not function the filter cylinder unit are
and the standby not installed properly.
light on the cover
of the appliance
flashes.
The cover is not closed
properly.
When I use my Your vacuum cleaner has
vacuum cleaner built up static electricity.
I sometimes feel The lower the air
electric shocks. humidity in the rooms,
the more static electricity
the appliance builds up.
Solution
Unplug the appliance. Make sure that the filter
cylinder is assembled properly into the filter cylinder
case ('click'). Also make sure that the filter cylinder unit
is inserted properly into the dust bucket ('click').
Make sure the cover is closed properly. Put the plug in
the wall socket and try again.
To reduce this inconvenience, we advise you to
discharge the appliance by frequently holding the tube
against other metal objects in the room (for example
legs of a table or chair, radiator etc.).
To reduce this inconvenience, we advise you to raise
the air humidity level in the room by placing water in
the room. For example, you can hang containers filled
with water from your radiators or place bowls filled
with water on or near your radiators.
removing the postureprotect handgrip
If you do not find the PostureProtect handgrip comfortable to use, you can
consider removing it.
1 Remove the screw cover strip from the PostureProtect handgrip.
2 Use a Torx T15 screwdriver to remove the screws of the
PostureProtect handgrip.
3 Remove the PostureProtect handgrip from the tube.
English
21