Attaching / Detaching Accessories; Use - gourmetmaxx SM-1504 Mode D'emploi

Attaching / Detaching Accessories

PLEASE NOTE!
■ The device must be switched off when the tilting mixer head is being fl ipped up or
down.
■ Switch off the device and pull the mains plug out of the plug socket before changing
any attachments.
1. Hold the mixer head (12) fi rmly with one hand and at the same time use your other
hand to move the release lever (1) in the direction of the arrow into the vertical
position. The mixer head is released and fl ips up automatically. You should also guide
it with your hand to prevent it fl ipping up abruptly.
2. Insert the mixing bowl (10) into the corresponding mount (9) and turn it in the direction
of the arrow (LOCK) to secure it in place. When you insert it, make sure that the
locking lugs on the mixing bowl sit in the recesses which are provided for them.
To take off the mixing bowl, turn it counter to the direction of the arrow (LOCK)
to release it.
3. Plug the attachment you want onto the mount (11) and press the spring on the mount
upwards until the attachment can be turned anticlockwise and fi xed in place. You
must feel it engage. When you plug it on, make sure that the pin on the mount fi ts in
the recess on the attachment.
To take off the attachment, press the spring upwards until the attachment can be
turned clockwise and released.
4. Flip down the mixer head and hold it in this position.
5. Move the release lever counter to the direction of the arrow into the horizontal position
and thus fi x the mixer head in place.
To take off the mixing bowl, turn it opposite to the direction of the arrow (LOCK) to
release it.

Use

PLEASE NOTE!
■ Make sure that the rotary switch is in the 0 position before the device is connected to
the mains power.
■ Do not overfi ll the mixing bowl (max. 1.5 kg). This might result in the device over-
heating or damage to the motor.
■ Never switch on the device if the tilting mixer head has not been fl ipped down!
■ Never fl ip up the tilting mixer head during use.
■ Never fi ll the device with hot food or liquids! The contents must not be hotter than
50°C. Allow hot food to cool down before processing it any further with the device.
■ Use the device for no more than 3 minutes without interruption to prevent over-
heating. Allow the device to cool down before using it again.
19 EN