Technical Specifications; Scope Of Delivery; Dimensions; Install The Electrical T-Distributor - Franke PR3O0027 Notice De Montage Et De Mise En Service

6.

Technical specifications

Operating voltage:
Power consumption:
Communication:
Protection class:
7.

Scope of delivery

Quantity
1
1
2
2
1
1
1
1
8.

Dimensions

9.

Install the electrical T-distributor

☞
Important!
The components of the electrical T-distributor may only be installed after the power
has been switched off.
☞
Recommended system cable see
When using cables other than the system cable, pay attention to the different colour
code. The outer diameter must not exceed 7.5 mm.
9.1 Remove the sleeving (a) of the system cable (approx. 40 mm).
9.2 Push the union nut (c) onto the system cable (b) up to the limit stop.
24 V DC
4 W
Ethernet via ECC function controller
IP 68
Name
Motor
Electronic module
Pressure cap
Electrical T-distributor
Adapter cable
Safety cap
Cover plate
Installation and operating instructions
Chapter 16., accessories.
5