Bresser TemeoTrend NBF Mode D'emploi page 49

Indicator
displays
on the unit
COM
WET
DRY
No
Indicator
ADJUSTABLE ALARM FOR EXTERNAL TEMPERATURE
The weather station can store an individually adjustable alarm for
each external sensor; it then sounds the alarm if the temperature
falls below or exceeds the specifi ed limit. To display the temperature
alarm briefl y press the TEMP AL. button. The upper limit is displayed
initially (default setting 70°C). To access the setting mode simply
press and hold the TEMP AL. button for approx. 3 seconds. The set
upper limit starts to fl ash. Now use the arrow buttons to set your desi-
red upper limit and then confi rm your selection by pressing the TEMP
AL. button. Then press the TEMP AL. button twice briefl y to display
the lower limit (default setting -50°C). To access the setting mode for
the lower limit press and hold the TEMP AL. button again for approx.
3 seconds. The set lower limit then starts to fl ash. Use the arrow but-
tons to set your desired lower limit and then confi rm your selection by
pressing the TEMP AL. button again. The temperature alarm is now
set and active.
Temperature
Range
20°C to 25°C
(68°F to 77°F)
-5°C -+ 50°C
(23°F - 122°F)
-5°C -+ 50°C
(23°F - 122°F)
Less than
20°C (68°F) or
More than
25°C (77°F)
49
Shows that the
Humidity
Range
Ideal range for
40% RH-
70% RH
OVER Contains exces
70% RH
Below
40% RH
40% RH
to
70% RH
GB/IE
Current
Environment
both relative
humidity and
temperature
moisture
Contains
inadequate
moisture
No comment