Kemper KHS Hygiene Flush Box PRO Instructions D'installation Et D'utilisation page 22

EN
Trap
PRO controller
Note!
CAN bus connection only in conjunction
with KHS Mini Control System MASTER 2.1.
22 / 108 – K410068903002-00 / 08.2021 – © www.kemper-olpe.de
1.4 Function
Connection CAN bus:
Fig. 686 02 008
During a flushing cycle, the drained water collects in the trap up
to the water trap height. The trap is closed on the waste-water
side by a removable anti-siphon trap cap. A built-in float switch
protects the trap against overflow.
The trap cover closes the trap and serves as a splash guard.
Underneath is a grid that catches falling objects, for example
during maintenance.
The PRO version of the controller can only be operated via
the integrated web server. The V1 and V2 LEDs serve as status
indicators for the respective water exchange group. When
the "PRESS" button (bottom right) is held for 5 seconds, a
local WLAN is established for 10 minutes to connect to a
smartphone, tablet or PC. Subsequently, interval, time, volume
and temperature flushes can be set using the integrated
commissioning wizard.
Danger! Electricity!
• We advise connecting an 0.03-A residual-
current device upstream for personal
protection.
Info - PRO status lights
Status
green In function
flashing green Wi-Fi active
flashing yellow CAN bus + Wi-Fi active
magenta Update
white Reset
V1 / V2
green Standby
blue Flushing active
red Error
orange Warning
red & blue Flushing active and current error