Remote Control - Danby Designer DPA100D1MDD Guide D'utilisation Et Soins De Propriètaire

CONTROL PANEL &

REMOTE CONTROL

7
1. Power button
Press the button to turn ON/OFF the A/C.
2. Mode button
Press the button to cycle between cooling, fan and auto-mode.
3. "DOWN" button
Press the button in cooling mode to reduce the temperature setting;
press it in timer mode to adjust ON/OFF time. Press "Up"
and "Down" buttons simultaneously to switch between Fahrenheit
and Centigrade temperature display.
4. LCD Temperature/ timer display window
This window displays the setting/room temperature and timer.
5. "UP" button
Press the button in cooling mode to increase the temperature setting;
press it in timing mode to adjust ON/OFF time.
6. Speed button
Press the button to choose high/ mid/low fan speed.
7. Timer button
Press the button in standby mode to set TURN-ON time.
Press this button to set TURN-OFF time when the unit is on.
REMOTE CONTROL
8. °C / °F switching button
Press the button to switch between °C and °F.
9. Auto-swing button
Press this button at any time after turning on the A/C to swing the
wind louvers automatically.
10. Lock button
Press this button to lock /unlock the the control panel button.
FEATURES AND COMPONENTS
5
6
3
4
4
2 1
2
6
8
10
4
5
1
3
9
7