Remote Control - Danby Designer DPA100D1MDD Guide D'utilisation Et Soins De Propriètaire

CONTROL PANEL &

REMOTE CONTROL

4
7
1. Power button
Press the button to turn the unit ON or OFF.
2. Mode button
Press the button to cycle between Auto, Cool, Fan, and Dry
modes.
3. Down button
Press the button in Cool mode to reduce the temperature setting;
press it in Timer mode to adjust the ON/OFF time. Press the Up
and Down buttons simultaneously to switch between Fahrenheit
and Centigrade temperature displays.
4. LCD Temperature/ Timer display window
This window displays the room temperature and the timer settings.
5. Up button
Press the button in Cool mode to increase the temperature setting;
press it in Timer mode to adjust the ON/OFF time.
6. Speed button (control panel)/ Fan button (remote control)
Press the button to select between High/ Medium/ Low fan speed.
7. Timer button
Press the button in standby mode to set TURN-ON time.
Press this button to set TURN-OFF time when the unit is on.
8. Remote controller receiving window
REMOTE CONTROL
9. °C / °F switching button
Press the button to switch between °C and °F.
10. Swing button
Press this button at any time after turning on the A/C to swing the
wind louvers automatically.
11. Lock button
Press this button to lock/ unlock the the control panel button. You
will need to use a paperclip or similar item to access the button.
FEATURES AND COMPONENTS
4
8
4
4
5
6
4
4
4
4
4
3
2
2
14
6
14
9
14
11
4
1
4
4
4
5
14
1
4
3
4
10
4
7