Sleep Function; Follow Me Function - Carrier RG10L/BGEF Manuel Du Propriétaire

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Self clean function (some units) :
Airborne bacteria can grow in the moisture that
condenses around heat exchanger in the unit.
With regular use, most of this moisture is evaporated
from the unit. Under Self clean operation, the unit
unit will clean itself automatically. After cleaning,
the unit will turn off automatically.
Note: You can only activate this function in COOL
or DRY mode.
FRESH function(
When the FRESH function is initiated, the
Ionizer/Plasma Dust Collector(depending
on models) is energized and will help to
remove pollen and impurities from the air

Sleep function(

The SLEEP function is used to decrease
energy use while you sleep (and don t need
the same temperature settings to stay
comfortable). This function can only be
activated via remote control.
, ,
For the detail, see sleep operation in
,
,,
USER S MANUAL.
Note: The SLEEP function is not available
in FAN or DRY mode.
) (some units) :
) :
,
,,

Follow me function(

The FOLLOW ME function enables the remote
control to measure the temperature at its
current location and send this signal to the
air conditioner every 3 minutes interval.
When using AUTO, COOL or HEAT modes,
measuring ambient temperature from the
remote control(instead of from the indoor
unit itself) will enable the air conditioner to
optimize the temperature around you and
ensure maximum comfort.
NOTE: Press and hold Turbo button for
seven seconds to start/stop memory
.
feature of Follow Me function.
If the memory feature is activated, On
displays for 3 seconds on the screen.
If the memory feature is stopped, OF
displays for 3 seconds on the screen.
While the memory feature is activated,
press the ON/OFF button, shift the mode
or power failure will not cancel the Follow
me function.
AP function(
Choose AP mode to do wireless network
configuration. For some units, it doesn't
work by pressing the SET button. To enter
the AP mode, continuously press the LED
button seven times in 10 seconds.
14
) :
,
,
,
,
)(some units) :
,
,
,
,

Hide quick links:

Publicité

Table des Matières
loading

Table des Matières