Lamborghini Caloreclima ECO 3-ST Notice D'installation Et D'entretien page 23

MAINTENANCE
Most components can be checked by removing the cover. For head inspection, the component plate
must be dismounted which can be hung on the burner body in 2 positions to allow intervention in the
most rationable way. The motor, transformer and electromagnetic valve are electronically connected
to plug/socket, thephotoresistance is inserted under pressure.ATTENTION:ensure unit is unplugged
before removing cover.
Fig. A Fig. B
By removing the cover, access is gained By unscrewing the plate fixing pin
to:condensor-motor, control box, transfor- the burner can be opened al-
mer photoresistance, pump, electroma- lowing access to the fan, nozzle,
gnetic valve. electrodes and preheater.
Fig. C - C1 To dismount the nozzle:
a)Loosen screw 1 and extract deflector/electrode set.
b)Unscrew the nozzle with spanner/counter-spanner.
Centering tongue for vertical position or
lightly to the right position (max 10°)
GB
Fig. D
IMPORTANT:fix the deflector/electrodes set on the-
nozzle holder tube in position as per fig. D.
23