Greencut GLM1400C Manuel D'utilisation page 47

• Do not clean the machine with solvents, flammable liquids or hard abrasives.
• Keep the handles of this machine dry and clean.
• Keep cutting tools sharp and clean. Proper maintenance of cutting tools reduces the likelihood of incidents by
making them easier to control.
• If the machine starts to vibrate in a strange way, turn it off and examine it to find the cause. If you do not detect
the reason take your machine to the Official Technical Service.
• To avoid burns or fire hazards, allow the machine to cool completely before transporting or storing.
• When transporting the product, make sure that the motor is stopped and the machine is properly secured to
prevent it from tipping over or being damaged.
• The equipment is not weatherproof, and should not be stored in direct sunlight, high ambient temperatures, or
in damp or wet locations.
• Store the product out of the reach of children.
SERVICE
• Have the product checked periodically by a qualified technician and use only original spare parts. If you have any
questions, please contact the Official Technical Service.
47
EN