Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
U S E R M A N U A L
TECHNICAL DATA
Parameter description
Parameter value
PERMANENT MAGNET
Product name
LIFT 5000KG
Model
SBS-ML-5000
Weight [kg]
178
Maximum lifting capacity [kg]
5000
Maximum load for lifting
1650
curved surfaces
Breaking load
15000
Working temperature [°C]
-40 ~ +80
1. GENERAL DESCRIPTION
The user manual is designed to assist in the safe and
trouble-free use of the device. The product is designed
and manufactured in accordance with strict technical
guidelines,
using
state-of-the-art
technologies
components. Additionally, it is produced in compliance
with the most stringent quality standards.
DO NOT USE THE DEVICE UNLESS YOU HAVE
THOROUGHLY READ AND UNDERSTOOD THIS
USER MANUAL.
To increase the product life of the device and to ensure
trouble-free operation, use it in accordance with this user
EN
manual and regularly perform maintenance tasks. The
technical data and specifications in this user manual are
up to date. The manufacturer reserves the right to make
changes associated with quality improvement.
LEGEND
The product satisfies the relevant safety
standards.
Read instructions before use.
The product must be recycled.
WARNING! or CAUTION! or REMEMBER!
Applicable to the given situation (general
warning sign).
Wear protective gloves.
Wear head protection.
Wear foot protection.
ATTENTION! Hand crush hazard!
ATTENTION! Suspended weight!
This machine features the source of a magnetic
field.
PLEASE NOTE! Drawings in this manual are for
illustration purposes only and in some details may
differ from the actual product.
The original operation manual is in German. Other
language versions are translations from German.
2. USAGE SAFETY
ATTENTION! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in an electric shock, fire and/
or serious injury or even death.
The terms "device" or "product" are used in the warnings
and instructions to refer to DUAL PERMANENT MAGNET
LIFT.
2.1. SAFETY IN THE WORKPLACE
a)
Make sure the workplace is clean and well lit. A messy
or poorly lit workplace may lead to accidents. Try
to think ahead, observe what is going on and use
common sense when working with the device.
b)
If you are unsure about whether the product is
operating correctly or if you find damage, please
contact the manufacturer's service centre.
c)
Only the manufacturer's service point may repair the
device. Do not attempt any repairs independently!
d)
Children or unauthorised persons are forbidden to
enter a work station. (A distraction may result in loss
and
of control over the device).
e)
Please keep this manual available for future
reference. If this device is passed on to a third party,
the manual must be passed on with it.
f)
Keep the device away from children and animals.
g)
If this device is used together with another
equipment, the remaining instructions for use shall
also be followed.
REMEMBER! When using the device, protect children
and other bystanders.
2.2. PERSONAL SAFETY
a)
Do not use the device when tired, ill or under the
influence of alcohol, narcotics or medication which
can significantly impair the ability to operate the
device.
b)
The machine may be operated by physically fit
persons who are able to handle the machine, are
properly trained, who have reviewed this operating
manual and have received training in occupational
health and safety.
c)
The machine is not designed to be handled by
persons (including children) with limited mental
and sensory functions or persons lacking relevant
experience and/ or knowledge unless they are
supervised by a person responsible for their safety or
they have received instruction on how to operate the
machine.
d)
When working with the device, use common sense
and stay alert. Temporary loss of concentration while
using the device may lead to serious injuries.
e)
Use personal protective equipment as required
for working with the device, specified in section 1
(Legend). The use of correct and approved personal
protective equipment reduces the risk of injury.
f)
The device is not a toy. Children must be supervised
to ensure that they do not play with the device.
g)
This machine generates a magnetic field which
may interfere with medical devices such as metallic
implants or pacemakers. Never use the machine or
approach the machine when it runs if not permitted
by the manufacturer of the medical devices or
a physician.
6
2.3. SAFE DEVICE USE
a)
When not in use, store in a safe place, away from
children and people not familiar with the device who
have not read the user manual. The device may pose
a hazard in the hands of inexperienced users.
b)
Keep the device in perfect technical condition.
Before each use check for general damage and
especially check for cracked parts or elements and
for any other conditions which may impact the safe
operation of the device. If damage is discovered,
hand over the device for repair before use.
c)
Device repair or maintenance should be carried out
by qualified persons, only using original spare parts.
This will ensure safe use.
d)
When transporting and handling the device between
the warehouse and the destination, observe the
occupational health and safety principles for manual
transport operations which apply in the country
where the device will be used.
e)
Do not leave this appliance unattended while it is in
use.
f)
Clean the device regularly to prevent stubborn grime
from accumulating.
g)
The device is not a toy. Cleaning and maintenance
may not be carried out by children without
supervision by an adult person.
h)
It is forbidden to interfere with the structure of
the device in order to change its parameters or
construction.
i)
If the machine has been overloaded or subject to
strong shock/vibrations, it must be inspected by
a qualified service technician before commencing
any work on the machine.
j)
Do not overload the machine with a load exceeding
the maximum admissible load.
k)
Do not hit the magnetic lifter or the load.
l)
Do not walk or stay under a hanging load (and in its
direct vicinity).
m)
Third parties must be warned about operation of the
machine and stay at a safe distance.
n)
Do not lift people or animals using this machine.
o)
Do not lift the load using the machine over people or
animals.
p)
Always pay attention to the load.
q)
Do not leave a hanging load unattended.
r)
Never store the machine with a payload attached to
it.
s)
Avoid situations in which the load could swing.
t)
Lift only one load at a time.
u)
This machine is not designed for permanent load
lifting.
v)
Pay particular attention to factors reducing the
magnetic attraction force (such as materials which
do not conduct the magnetic field, coarseness
and shape of surface, temperature, the ratio of
ferromagnetic material to steel, and that the lifted
material must be thick enough to completely absorb
the stream of the magnetic field).
w)
Never introduce any modifications to the machine.
x)
Do not conduct mechanical or similar works
(welding, cutting, etc.) on a hanging load.
y)
After completion of work, the machine must be
secured against unauthorised use.
ATTENTION! Despite the safe design of the device
and its protective features, and despite the use of
additional elements protecting the operator, there is
still a slight risk of accident or injury when using the
device. Stay alert and use common sense when using
the device.
3. USE GUIDELINES
Magnetic hoists are lifting machines that generate a high
force of magnetic attraction with the use of a fixed magnet.
They are designed for the temporary lifting and moving of
loads made of ferromagnetic metals.
The user is liable for any damage resulting from
unintended use of the device.
3.1. DEVICE DESCRIPTION
2
1
3
4
1.
Shackle
2.
Lever lock
3.
Grip stops
4.
Magnetic surface
Additional technical data
Model
W
L
H
SBS-ML-5000
570
230
220
7
EN
R
470
Publicité
Table des Matières
