Care And Maintenance; Technical Specifications - HQ Power HQMC10011 Mode D'emploi

Distorted sound.
Feedback.
7.

Care and Maintenance

Cleaning
•
Before starting any cleaning or maintenance activities, unplug the appliance from its
power source.
•
Wipe all exterior surfaces of the appliance clean with a soft cloth dampened with a
soap and water solution. Do not immerse or submerge any part of the appliance in
water or any other liquid. Never use solvents or cleaning agents containing
petroleum (petrol, kerosene, oil), paint thinner, turpentine, alcohol, or ammonia.
Maintenance
•
This appliance does not need any maintenance. Do not open exterior casing of the
appliance. There are no user-serviceable parts inside. Opening or visible attempts to
open or repair the appliance may void any guarantee and/or cause damage to the
product or personal injury.
Storage
•
Store the appliance and its accessories in its original package in a clean and dry
area.
8.

Technical Specifications

receiver
frequency range
HQMC10011 .................................................................................... 864.000 MHz
HQMC10012 ................................................................ 863.050 MHz/865.000 MHz
receiving system ............................................................................... PLL composed
receiving module ..................................................................... single (fixed) channel
frequency stability .................................................................................. ± 0.005 %
S/N ratio .................................................................................................... 100 dB
dynamic range ......................................................................................... > 100 dB
frequency response ......................................................................... 40 Hz to 18 kHz
power supply
HQMC10011 ..................................................................... 12 VDC, max. 1000 mA
HQMC10012 ....................................................................... 12 VDC, max. 500 mA
working range .................................................... 100 m (depending on surroundings)
dimensions ............................................................................... 195 x 140 x 40 mm
weight ......................................................................................................... 920 g
V. 01 – 19/11/2019
HQMC10011/HQMC10012
Presence of appliances
working at the same
frequency.
High volume level.
Speaker placement.
7
Remove the appliances or
change the used
frequency.
Decrease the volume level.
Do not point the
microphone to the speaker
output or install the
speaker in front of the
microphone.
©Velleman nv