HQ Power HQMC10011 Mode D'emploi page 6

Connecting and Powering Your Receiver
1. Connect the receiver's XLR balanced output to a mixing panel.
2. Connect the receiver's XLR unbalanced output to a power amplifier.
3. Connect the receiver to the mains using the power adapter.
4. Install the antennae on the receiver and erect them.
Ideal working distance is 60 m. Keep the microphone and the receiver within the ideal
6. Troubleshooting
Issue
The LED does not light.
The LED flashes.
No reception or sound.
V. 01 – 19/11/2019
HQMC10011/HQMC10012
The maximum working range is about 100 m depending on surroundings.
working distance for best results.
REMARK
Reason
No power or wrong battery
installation.
Low battery power.
One of the appliances is
not powered.
Frequency mismatch.
The maximum working
range is exceeding.
Wrong connection.
Low volume level.
6
Solution
Assure power, replace or
re-insert the batteries
correctly.
Replace the batteries.
Check and power all
appliances.
Make sure the microphone
and receiver us the same
frequency.
Move microphone and
receiver within the ideal
working distance.
Check the connection
between receiver and
power amplifier/mixing
panel.
Slowly increase the volume
level.
©Velleman nv