Alecto PAS-210A Mode D'emploi page 38

PAIRING WITH A BLUETOOTH
To use the Bluetooth
device containing the music to be played (mobile phone, tablet or other). The
pairing process is as follows:
1. Turn on the search function on the Bluetooth
manual of that device).
2. Switch on the MP3 player and then repeatedly press the "MODE" button until
the small Bluetooth
3. Now select "ALECTO" in the list that appears in the display of the Bluetooth
device containing the music to be played.
4. If asked, enter the password or PIN code "0000".
5. Depending on the device containing the music, you should set this device to
not play music through the headphones output or its own speaker, but to send
the signal to the MP3 player (refer to the user's manual of that device).
Attention: the MP3 player only plays music and does not support phone calls.
ENVIRONMENT:
• The packaging of this baby video monitor can be discarded as
waste paper. However, we advise you to save this packaging so
you can adequately protect the devices for transportation.
• In case the baby video monitor is being replaced, please return it to
your supplier; they will guarantee environment-friendly processing.
AUDIO SOURCE:
®
function, the MP3 player must be paired with the Bluetooth
®
appears in the display.
®
music source (refer to the user's
®
38
®
®