Power Switch - Alecto PAS-210A Mode D'emploi

OPERATION / CONNECTIONS

POWER SWITCH:

Use the power switch to switch on the amplifier.
MIC/LINE:
The supplied wired microphone can be connected to the XLR connection of the
MIC/LINE input; this microphone has a balanced output.
You may also connect an audio source at line level to this input (see also 'LINE'
below), but don't forget to set the LINE/MIC switch to the correct position.
You can then use the MIC/LINE volume control to adjust the volume.
LINE (AUX):
You can connect separate devices to the PAS-210A, for example a DVD player
(sing-a-long), tablet, smartphone or separate MP3 player. These devices are
provided with a line output and can be connected to the LINE INPUT using the
appropriate cables (not included) (3.5mm stereo jack or RCA or RCA input).
We recommend you to use the Cinch input or 3.5mm stereo jack input separately.
When using multiple inputs simultaneously, the sound may become distorted. Use
the LINE VOLUME volume control to adjust the volume of these inputs.
MIX OUT: XLR symmetrical output for an additional amplifier or active speaker.
HIGH / LOW: Use this control to adjust the treble (HIGH) or bass (LOW) levels.
MP3 VOLUME: Use this control to adjust the volume of the MP3 player.
35