Mains Power; Before Use - Alecto PAS-210A Mode D'emploi

GENERAL:
• Carefully read the user's manual and follow all directions.
• Before cleaning the speaker, always remove the mains cable from the wall
socket and switch off the speaker.
• Clean the cabinet with a slightly moist cloth.
• Never place or use the set in wet or humid space or environment.
• Ensure adequate heat dissipation; never cover the set nor place it directly next
to a heat source.
• Prevent damaging the mains cable and ensure it doesn't cause a risk of tripping
or falling.
• Never disassemble the set; this may only be performed by qualified personnel.
• Only turn on the speaker after setting all volume controls to MINIMUM (0), to
avoid possible scares when switching on.
• Prolonged listening to high volume levels can cause hearing damage
USB / SD / BLUETOOTH® PLAYER / FM RADIO

MAINS POWER:

Use the supplied power cord to connect the PAS-210A to a mains power of
MIC/LINE VOLUME LINE VOLUME
230 Volt.
MEDIA PLAYER
LINE
MIC
MIC/LINE VOLUME LINE VOLUME
MIC/LINE INPUT LINE INPUT
LINE LINE
MIC MIC
MIC/LINE INPUT LINE INPUT
PAS-210A
WARNING / MAINTENANCE

BEFORE USE

LIGHT
OFF
ON
LINE OUT
LINE OUT
AC-230V 50Hz / F2.5A
AC-230V 50Hz / F2.5A
PAS-210P
PAS-210P
Power: 100Watt RMS-200Watt music
Sensitivity: 93dB@1W/1M
Frequency Response: 40Hz-20Khz
Power: 100Watt RMS - 200Watt music
Impedance: 8Ω
Sensitivity: 93dB@1W/1m
Frequency Response: 40Hz-20KHz
Speakon Connection
Impedance: 8
1+=Positive
1-=Negative
2+ and 2-=No connection
IN
34
The PAS-210P
receives its
signal from the
PAS-210A or from
another amplifier
connected through
the supplied
speaker cable with
Speakon plugs.
OUT