Transport - Makita EB5300TH Manuel D'instructions

Masquer les pouces Voir aussi pour EB5300TH:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

4.
Use the blower and the tools supplied
only for applications specified.
5.
Start the blower engine only after
the entire tool has been assembled.
Operation of the tool is permitted only
after all the appropriate accessories are
attached.
6.
The engine is to be switched off immedi-
ately if there are any engine problems.
7.
When working with the blower, always
wrap your fingers tightly around the
handle, keeping the control handle cra-
dled between your thumb and forefinger.
Keep your hand in this position to have
your machine under control at all times.
Make sure your control handle is in good
condition and free of moisture, pitch, oil
or grease.
8.
Always ensure a safe, well-balanced
footing.
9.
Carry the blower properly on both shoul-
ders during operation. Do not carry the
blower with only one shoulder strap.
Otherwise personal injury may result.
10. Operate the blower in such a manner as
to avoid inhalation of the exhaust gases.
Never run the engine in enclosed rooms
(risk of suffocation and gas poison-
ing). Carbon monoxide is an odorless
gas. Always ensure there is adequate
ventilation.
11. Switch off the engine when resting or
leaving the blower unattended. Place it in
a safe location prevent danger to others,
setting fire to combustible materials, or
damage to the machine.
12. Never lay the hot blower onto dry grass
or onto any combustible materials.
13. All protective parts and guards supplied
with the machine must be used during
operation.
14. Never operate the engine with a faulty
exhaust muffler.

Transport

Shut off the engine during transport.
1.
2.
Position the blower safely during car or
truck transportation to avoid fuel leakage.
When transporting the blower, ensure
3.
that the fuel tank is completely empty.
4.
Lift the blower with holding carry handle
when you carry it. Do not drag the blower
by nozzle, pipe or other parts.
5.
Hold the blower firmly during
transportation.
6.
When transport the blower, bend your
knee and make sure you do not damage
your shoulder and lower back.
Refuelling
1.
Stop the engine during refuelling, keep well
away from open flame and do not smoke.
2.
Avoid skin contact with petroleum prod-
ucts. Do not inhale fuel vapor. Always
wear protective gloves during refuelling.
Change and clean protective clothing at
regular intervals.
3.
Take care not to spill either fuel or oil
in order to prevent soil contamination
(environmental protection). Clean the
blower immediately after fuel has been
spilt. Allow wet cloths to dry before dis-
posing in properly, covered container to
prevent spontaneous combustion.
5
ENGLISH

Hide quick links:

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Eb5300wh

Table des Matières