Proper Use; Manufacturer - Wohler 24471 Mode D'emploi

General Information
1.3

Proper use

1.4

Manufacturer

18
The Wöhler Snap and Sweep System is used for
cleaning chimneys and exhaust pipes. Cleaning
can be carried out by one person.
For this purpose, a cleaning attachment is placed
on a rod. The rod is then extended by any number
of additional rods.
For cleaning, the rods can be pushed by hand or
rotated with a cordless screwdriver or a drill. Do
not use the Wöhler Hammer Probe for any other
use than set out in this manual.
Caution!
The Wöhler Snap & Sweep System can be used for
cleaning pipes with a diameter of Ø 15 cm or more..
Wöhler Technik GmbH
Wöhler-Platz 1
33181 Bad Wünnenberg
Tel.: +49 2953 73-100
Fax: +49 2953 73-96100 · Email: in-
fo@woehler.de info@woehler.de