Product Description; Assembling The Vacuum Cleaner - Oase BioCompact 25 Notice D'emploi

• Only carry out work on the unit that is described in
this manual. If problems cannot be overcome,
please contact an authorised customer service
point or, if in doubt, the manufacturer.
• Never carry out technical changes to the unit.
• Only use original spare parts and accessories for
the unit.
Warnings used in these instructions
N O T E
Information for the purpose of clarification or for
preventing possible damage to assets or to the envi-
ronment.
Cross-references used in these instructions
 A Reference to a figure, e.g. Fig. A.

PRODUCT DESCRIPTION

This filter serves to filter water in an aquarium and
maintain the water circulation. All filter types are inte-
rior filters and are therefore installed submerged in-
side the aquarium.
Intended use
BioCompact 25/50, referred to as "unit", may only be
used as specified in the following:
• Operate in accordance with instructions.
The following restrictions apply to the unit:
• Only use indoors and inside the aquarium.
• Do not use for commercial or industrial purposes.
• Do not use in conjunction with chemicals, food-
stuff, easily flammable or explosive substances.

ASSEMBLING THE VACUUM CLEANER

N O T E
Thoroughly rinse out all filter material with warm tap
water before using for the first time in order to re-
move any soiling. (→ Cleaning or replacing the filter
media)
BioCompact 25
The supplied suction cups serve for fastening the unit
to a clean, smooth surface.
How to proceed:
 A
1. Remove the lid of the filter container.
2. Pull out the foam filter.
3. Pull off the motor housing.
- EN -
15