4/ Cleaning And Maintenance; Cleaning The Food Processor; Storing The Food Processor; Warranty And After-Sale Service - Brandt ROB400V Manuel D'instruction

- The shredding and slicing disc can be used on both slicing and shredding side. The side facing
upwards is the working side in each case.
- Do not work with the shredding and slicing disc more than 2 minutes at a time. After 2 minutes of continuous
operation, allow the appliance to cool down for 5 minutes.
- Use only the foodstuffs listed in the processing instructions.
- Do not attempt to cut or grate food such as tomatoes, lemons, dates, peaches, or frozen foods.
Processing instructions when using the shredding and slicing disc
Food
Cabbage Remove the center and cut the cabbage into pieces
that will fit into the feeding-tube opening.
Carrots Peel and cut into 7 cm pieces
Onions Peel and cut in two
Potatoes Peel and cut into pieces that will fit into the
feeding-tube opening.
Hard cheese Cut into pieces that will fit into the feeding-tube
opening.
Cucumber Cut in two
4/ CLEANING & MAINTENANCE
A. Cleaning the food processor
To avoid any danger:
- Always disconnect the appliance from the mains before cleaning.
- Whenever possible, rinse parts immediately after processing for easy cleanup.
- Never immerse the motor unit in water or use caustic or abrasive cleaning materials clean only with a damp
cloth.
- Wipe the base, control knob, and feet with a damp cloth and dry thoroughly. Stubborn spots can be removed
by rubbing with a damp cloth and a mild, non-abrasive cleaner. Do not immerse the base in liquid.
- Do not use rough scouring pads or cleansers on any plastic or metal parts.
- Do not fill the bowl with boiling water or place any of the parts of the appliance in boiling water
- Discoloration on the housing caused by carotene, for example, can be removed using cooking oil.
B. Storing the food processor
After cleaning the various parts, wipe gently with a clean cloth. Reassemble all parts and keep the appliance in
a dry place. Remember to clean all the parts after each use.
C. Warranty and after-sale service
This product is covered by a 2-year warranty by your retailer. For more details, please refer to the warranty
conditions supplied by your distributor.
FagorBrandt SAS – Management Company - SAS with a capital of 20,000,000 euros- Head Office: 7 rue Henri Becquerel -
Cutting
92500 Rueil-Malmaison - RCS Nanterre 440 303 196
Peel and cut into pieces
that
feeding-tube opening.
15
Shredding
will fit into the