Before Using Your Food Processor; 3/ Using Your Appliance; Using The Chopper - Brandt ROB400V Manuel D'instruction

On / Off switch
Pulse: If you wish to chop food with short
pulses, switch this control knob alternately
On: 1
Off: 0
B. Before using your food processor
1. When unpacking the product and removing packing material, handle the Chopping Blade, and
Slice/Shred Disc carefully; they are very sharp.
2. Before using this appliance for the first time, clean the motor unit with a damp cloth.
3. Clean the shaft and blades in warm soapy water.
4. Dry all parts thoroughly.

3/ USING YOUR APPLIANCE

A. Using the chopper
Assembly
- Place bowl (4) on top of motor unit (7), ensuring that the two closing
fixtures interlock. Turn bowl (4) in an clock-wise direction as far as it will go.
- Place the chopping blade (8) on the drive shaft.
- Put the food to be processed into bowl (4). Information on the maximum
feeding amounts can be found in the processing instructions.
Operation
- Insert the mains plug in the socket outlet.
- Rotate the switch (6) to "1" position.
- Disengage and remove the lid only when the chopper blade has stopped rotating.
- Carefully remove the chopper blade and empty the bowl.
- When you have finished preparing your food, pull out the mains plug.
- Take hold of lid (3) by the two outer grooved and ridged areas. Put the lid onto
the bowl (4) in such a way as to allow the L-shaped lug to be turned into the
safety slit situated beneath switch. Turn the lid in an clockwise direction as far as
it will go. The lug on the lid must be seated in the slit. The appliance can be
started only if the lug on the lid is correctly positioned in the safety slit.
- Put the flow insert (12) on the appliance
13