Cleaning The Drum - ARTHUR MARTIN AW6T7242AF Notice D'utilisation

Descaling
If the water hardness in your
area is high or moderate, we
recommend that you use a
water descaling product for
washing machines.
Regularly examine the drum to check for
limescale.
Regular detergents already contain water
softening agents, but we recommend to
run a cycle with an empty drum and a
descaling product occasionally.
Always follow the instructions
that you find on the packaging
of the product.
Maintenance wash
The repeated and prolonged use of low
temperature programmes can cause
detergent deposits, fluff residues, bacterial
growth inside the drum and the tub. This
could generate bad odours and mildew.
To eliminate these deposits and clean the
inner part of the appliance, run a
maintenance wash regularly (at least once
a month).
Refer to Cleaning the drum
chapter.
Descaling
If the water hardness in your
area is high or moderate, we
recommend that you use a
water descaling product for
washing machines.
Regularly examine the drum to check for
limescale.
Regular detergents already contain water
softening agents, but we recommend to
run a cycle with an empty drum and a
descaling product occasionally.
Always follow the instructions
that you find on the packaging
of the product.

Cleaning the drum

Regularly examine the drum to prevent
unwanted deposits.
Rust deposits in the drum may occur due
to rusting foreign body in the washing or
tap water containing iron
Clean the drum with special products for
stainless steel.
Always follow the instructions
that you find on the packaging
of the product.
Do not clean the drum with
acidic descaling products,
scouring products containing
chlorine or iron or steel wool.
For a thorough clean:
1. Remove all laundry from the drum.
2. Run a Coton
highest temperature.
3. Add a small quantity of powder
detergent into the empty drum, in order
to rinse out any left residues.
Occasionally, at the end of a
cycle the display may show the
icon : this is a
recommendation to perform the
"drum cleaning". Once the
drum cleaning has been
performed, the icon
disappears.
Lid seal
Regularly examine the seal. Clean it when
needed, using ammonia cream cleanser
agent without scratching the seal surface,
Always obey the instructions
that you find on the packaging
of the product.
programme with the
21