ARTHUR MARTIN AW6T7242AF Notice D'utilisation page 18

18
calculate the real programme duration.
During this phase the Time Manager
bars placed below the time digits
play a simple animation.
2. After about 15-20 minutes the Time
Manager bars disappear and new
cycle duration is displayed.
The appliance automatically adjusts
the programme duration to the load to
achieve perfect washing results in the
minimum possible time.
Interrupting a programme and
changing the options
When the programme is running, you can
change only some options:
1. Touch the button Start/Pause
The related indicator flashes.
2. Change the options. The given
information in the display changes
accordingly.
3. Touch the button Start/Pause
again.
The washing programme continues.
Cancelling a running
programme
1. Press the button On/Off to cancel the
programme and to deactivate the
appliance.
2. Press the button On/Off again to
activate the appliance.
If the SensiCare System has
completed and the water filling
has already started, the new
programme starts without
repeating the SensiCare
System. The water and the
detergent are not drained out in
order to avoid waste.
There is also an alternative way of
cancelling:
1. Rotate the selector knob to the "Reset"
position .
2. Wait for 1 second. The display shows
.
Now, you can set a new washing
programme.
Opening the lid - Adding
garments
If the temperature and level of
the water in the drum are too
high and/or the drum is still
rotating you should not open
the lid.
While a programme or the delay start
operates, the appliance lid is locked. The
display shows the indicator
1. Touch the Start/Pause
indicator
.
2. Wait until the lid lock indicator
stops flashing and goes off. Open the
appliance lid and drum doors. If
necessary, add or remove the items.
Close the drum door and lid. Touch the
Start/Pause
programme or the delay start
continues.
End of the programme
When the programme has finished, the
appliance stops automatically. The
acoustic signals operate (if they are
active). The display shows
The indicator of the Start/Pause
goes off.
The lid unlocks and the indicator
off.
1. Press button On/Off to deactivate the
appliance.
After five minutes from the end of the
programme, the energy saving function
automatically deactivates the appliance.
When you activate the
appliance again, the display
shows the end of the previous
programme. Turn the
programme dial to set a new
cycle.
.
button. The
starts flashing.
button. The
button
goes