Varma Tec V400F2 Mode D'emploi page 9

23. Switch the main plant supply off when:
a) there is a malfunction;
b) you decide to clean the outside;
c) you decide not to use the appliance for a long period of time.
24. Do not cover or obstruct the front grille when in use.
25. Do not introduce objects into the slots or apertures in the heater.
26. Keep mains supply cables away from the heating element.
27. Keep the front grille clean.
28. If you decide to permanently remove the appliance, switch it off and disconnect it from the mains, and then keep it well out of
the reach of children and the handicapped. It is also recommended to make it unusable by cutting its supply cable off.
29. Do not use the appliance in conjunction with programmers, timers or other tools capable of turning it on automatically.
30. Heaters must be switched on and switched off one by one. Do not use the main switchboard for switching on or switching off the
units, to avoid voltage surges which could burn out the bulb.
31.As a general rule, the heaters must be kept at a distance (visual axis) of more than 2 meters from cardboard boxes, fabrics etc.
and from windows. If used in workshops or garages where inflammable paints or fuels are kept, the heater must be kept at a
distance of more than 4 meters from the source of danger. The equipment must not be used in poorly ventilated dusty environments
to avoid damage to the bulb.
32. It is absolutely forbidden to try to repair the heater; in case of faults contact Star Progetti Tel. 0039/02/90639261.
9