Bevel Cuts With The Rip Guide; Repairs; Environmental Protection - Metabo ST 50 Pendix Mode D'emploi

ENGLISH
Fitting the rip guide
19
b
20
M+P-14A-
Slacken off the screws (20) and slide the circle-
cutting and rip guide (21) into the clamps (19)
on the footplate (10). Set dimension (b). Turn
the screws (20) tight. Remove the arbour (c).

10.2 Bevel cuts with the rip guide

Remove the guard cover (8), the anti-
splintering footplate insert (7) and the vacuum
extraction hose (E).
Slacken off the hexagon socket-head screw
(17) in the footplate (10). Slide the footplate
(10) forward, twist round and push backwards
or forwards, engaging in one of the notches for
15° and 30° bevel angles.
For a 45° bevel angle, swivel the jig saw round
to the left and slide the footplate (10) forwards,
engaging in the rearmost notch. The jig saw
must not be swivelled to the right for a 45°
bevel angle, as otherwise the saw-blade
clamping device may be damaged.
Retighten the hexagon socket-head
screw (17).
Remember to remove the clamps
after use!
18
21
10

11 Repairs

Repairs to power tools must be
carried out by a qualified electrician
only.
Any Metabo power tool in need of repair can
be sent to one of the addresses listed in the
spare parts list.
Please accompany the tool for repair with a
brief description of the fault identified.

12 Environmental Protection

Metabo packaging is 100% suitable for
recycling.
Power tools and accessories at the end of their
service life still contain large amounts of
valuable raw materials and plastics which can
likewise be fed back into a recycling process.
These Operating Instructions are printed on
paper produced in a chlorine-free bleaching
process.
Only for EU countries: Never dispose
of power tools in your household
waste! In accordance with European
Guideline 2002/96/EC on used
electronic and electric equipment and its
implementation in national legal systems, used
power tools must be collected separately and
handed in for environmentally compatible
recycling.