Velleman CAMSET29 Mode D'emploi page 8

Video Recording Time: changes the default length of recorded
video
Backlight Time: changes the time the device remains powered on
(5 – 10 – 15 – 20 seconds).
Format Micro SD card: allows formatting the Micro SD card (press
the Answer key to cancel or the Menu-OK key to confirm).
Restore factory settings: restores factory settings (press the
Answer key to cancel or the Menu-OK key to confirm).
6.4 User manual
The User manual contains the user guide and system information.
7. Troubleshooting
Problem
The device randomly powers
on/off.
When inserting the Micro SD
card, the device displays a
message "Insert Memory Card"
or "Param Error".
The device displays the message
"Param Error".
8. Cleaning and maintenance
Insert or replace the batteries
Install the Micro SD card before the batteries and click the Micro
SD card. The device will only recognize the SD card if inserted
before the batteries.
Only use appropriate batteries (see Technical Specifications
below).
1. Remove the battery lid.
2. Remove the used battery and install a new one.
Mind the battery polarity (+ and -).
3. Close the battery lid.
V. 01 – 12/02/2013
CAMSET29
Possible solution
May be caused by low batteries.
Change the batteries.
Remove and put back the
batteries.
Use another Micro SD card.
Reconnect the camera cable.
8 ©Velleman nv