Intended Use - Black & Decker Flex Vac BDH2020FLAAPB Mode D'emploi

batteries may exhibit unpredictable behavior resulting
in fire, explosion or risk of injury.
d ) Do not expose a battery pack or appliance
to fire or excessive temperature. Exposure to
fire or temperature above 266 °F (130 °C) may
cause explosion.
e ) Have servicing performed by a qualified repair
person using only identical replacement parts.
This will ensure that the safety of the product
is maintained.
f ) Only for use with S010QU2300040 chargers.
SAVE THESE
INSTRUCTIONS
SYMBOLS
The label on your tool may include the following symbols. The
symbols and their definitions are as follows:
V ......................... volts
W ........................ watts
Hz ....................... hertz
A ......................... amperes
min ..................... minutes
Wh ...................... Watt hours
or DC ...... direct current
or AC ........... alternating current
...................... Class I Construction
(grounded)
ASSEMBLY

WARNING:
repair the appliance.

Intended Use

Your BLACK+DECKER Lithium Ion cordless vacuum cleaner
has been designed for light, dry vacuum cleaning purposes.
This appliance is intended for household use only.
Charging the Battery (Fig. B)

WARNING:
supplied charger.

WARNING:
empty all contents and dry thoroughly if needed to
avoid damage to your appliance.
1. Before first use, the battery must be charged for at least
13 hours.
2. Make sure the appliance is switched off. The battery will
not be charged with the on/off power switch
ON position.
3. Plug the external power supply cord
120 Volt 60 Hz electrical outlet.
4. Lower the appliance onto the charging base. The
charging indicator LED
...................... Class II
Construction
(double insulated)
.../min or rpm .. revolutions or
reciprocation per
minute
n o ....................... no load speed
...................... earthing terminal
..................... safety alert symbol
Do not attempt to modify or
For use only with the
Before charging, be sure to
1
16 into a standard
6 will illuminate.
5. When charging is complete, the LED will turn off.
While charging, the charger may become warm. This is
normal and does not indicate a problem.
Leaving the appliance connected to the charger indefinitely
will not damage the appliance's batteries or shorten
its run time. The charger automatically reduces power
consumption when charging is complete.
Fig. B
16

WARNING:
at ambient temperatures below 39 °F (4 °C) or above
104 °F (40 °C).
Charging Indicator LED (Fig. B)
1. While charging, the white LEDs on the charger
flash and increase in sections.
2. When charging is completed, the white LEDs will
turn off.
in the
English
1
17
6
Do not charge the battery
6 will
3