Brandt BHB6602X Guide D'utilisation page 59

EN 2 / INSTALLING YOUR APPLIANCE
-Lift the hood body and slide it into the motor
unit (Pic 7) then fasten it with 5 screws.(Pic 8)
-Remove the Aluminum filters and connect
the cable (Pic 8)
-Fix the outside chimney bracket into the
outside chimney, ensuring the inside chimney
can move up and down freely. (Pic 9)
- Then put the chimneys onto the hood and
fix the inside chimney with the bracket by 2
screws.(Pic 10)
10
Pic 7
Pic 9
58
Pic 8
Pic 10