TECHNICAL DATA
Modulation
Range
Audio frequency response
THD
Power supply
Power consumption of transmitter
RF output power
Signal-to-noise ratio
Frequencies T 6
Frequencies T 6-9
Audio input voltage / Audio connector
Charging compartments
Weight / Dimensions
Transducer principle
Signal-to-noise ratio
Max. sound pressure level
Tuning range HDR 6
Tuning range HDR 6-9
Power supply
Current consumption / Operating time
Weight / Dimensions
SUPPLY SCHEDULE
RS 6 SYSTEM
FM stereo
up to 100 m
20 - 20,000 Hz
‹ 0.8 %
T 6 TRANSMITTER
12 V DC via plug-in mains unit NT 92
approx. 1 VA
typ. 1.2 mW
typ. 70 dB
433.40 MHz, 434.13 MHz, 434.50 MHz (channels switchable)
925.40 MHz, 926.15 MHz, 926.50 MHz (channels switchable)
10 mV - 3 V / 3.5 mm stereo jack plug + 1/4" (6.3 mm) adaptor
2, for BA 150
approx. 90 g (without plug-in mains unit) / 130 x 140 x 40 mm
HDR 6 HEADPHONE RECEIVER
open
› 65 dB
105 dB
433 - 435 MHz, stepless
925 - 927.2 MHz, stepless
via BA 150 rechargeable accuplug, 2.4 V
approx. 18 mA / approx. 3.5 hrs per accuplug
approx. 160 g incl. accuplug / 150 x 80 x 200 mm
1
T 6 or T 6-9 transmitter
1
HDR 6 or HDR 6-9 headphone receiver
1
BA 150 rechargeable accuplug
1
plug-in mains unit, 12 V DC, for 230, 120 or
240 V mains voltage
1
connection cable with 3.5 mm / 6.3 mm (1/4") jack plug adaptor
1
Plastic tubing
1
RCA adaptor stereo (US-Version only)
1
instructions for use
21