Sangean DT-210 Mode D'emploi page 9

Change AM (MW) band tuning step
( available only on DT-210/V not for
LW version )
In Europe and other parts of the world, AM
(MW) tuning step are 9 kHz, in America the
AM tuning step is 10 kHz.
To change the AM tuning step from 10 kHz
to 9 kHz, proceed as follows,
1. Press Tuning Down button then the power
button to switch on the radio, the radio will
be changed into 9 kHz tuning step on AM
band.
To change the AM tuning step from 9 kHz to
10 kHz, proceed as follows,
1. Press Tuning UP button then Power button
to switch on the radio, the radio will be
changed into 10 kHz tuning step on AM
band.
GB
8