Recalling A Preset Station - Sangean DT-210 Mode D'emploi

Recalling a preset station

1. Switch on the radio.
2. Press RECALL button and Tuning Up/
Down to recall required preset station
Display will flash preset station.
3. Press RECALL button again, once the
required preset station is found.
Lock Switch
The lock switch located on the rear cabinet is
used to prevent unintentional operation.
1. Slide the lock switch to the up locked
position , the symbol will appear in
the display. The power and all other
buttons will be disabled. This will prevent
accidental operation when the radio is
packed in a suitcase. To release the lock
switch , move the switch to the down
unlocked position, the
be removed from the display.
GB
symbol will
6