Publicité
- en -
Dear customer
Thank you very much for choosing a weka product.
Read these instructions through completely before assembling your product in order to avoid errors in
assembly or damage.
IMPORTANT
Please use the enclosed packing list to check immediately that your weka product has been
delivered complete and intact.
Please do not dispose of the packing list before the guarantee period has expired. This list enables you to
check that all the individual parts are present. It should be retained along with the proof of purchase. Any
complaints which may arise can probably be easily rectified with this list. The item numbers on the packing
list do not correspond to the item numbers in the following assembly instructions.
We recommend that 2 people carry out the assembly.
In order to prevent accidents, we recommend that children are kept out of the direct vicinity during
assembly.
We reserve the right to make further technological developments. This means that there many be minor
deviations in the illustrations.
Please do not simply throw away the packaging material. Paper, card and corrugated board as well as
plastic packaging materials should be placed in the correct collection containers.
RECOMMENDATIONS / WOOD PROTECTION
Please drill pilot holes for all screw connections to avoid damaging the wood.
Before and during assembly, protect untreated wood from direct sunlight or moisture.
We recommend that you consult an expert in wood treatment agents.
Once the structure has been assembled, give the exterior of the entire construction at least two
coats of an open-pore wood protection agent.
A regular coating in accordance with the manufacturer's instructions of the wood protection agent is
necessary to protect the wood.
TOOL
You should have the following tools to hand before beginning assembly. (Not supplied.)
Spring tape measure
Techn. Änderungen vorbehalten!
Spirit level
Pencil
2
Drill
Copyright weka-Holzbau GmbH, Neubrandenburg
Electric screwdriver
Publicité
