Set Up And Configuration; Cleaning And Storing - Petromax fe45 Mode D'emploi

Set up and configuration

DE
1. Place the support legs in the device on the table and tighten them with the clamping lever. Now
EN
set the table upright.
2. Place the windbreak with the hinges facing outwards and tighten it with the wing bolts.
FR
Tip: The table can be assembled and disassembled as often as pleased and packed for trans-
port or storage.
Instruction for use with support legs
With the support legs installed, the table has a comfortable, back-friendly work height. You can easily
fit several Dutch Ovens, a Loaf Pan or Sandwich and Waffle Iron side by side and use them comfortably.
Instruction for use without support legs
When the support legs are not attached, the table is perfect for stacking several Dutch Ovens. You
should choose an even, fireproof and steady surface such as stone floor or gravel.

Cleaning and storing

Thanks to the gap at the front of the work surface, cold ashes and rests of charcoal can be easily swept
out, e.g. with a hand brush. Do not leave the table stand unprotected outdoors. We recommend that
you store it in a garden shed or similar or cover it well.
Due to the heat during use partial spalling of the powder-coated parts may occur. This is no
defect of the material. We recommend to conserve the blank metal parts with oil and protect
the table against corrosion.
Warranty
Under proper use, a warranty period of two years will apply to your Petromax Dutch Oven Table from the
date of purchase. This does not apply to wearing parts. If you cannot use your product due to a defect in
material or manufacturing, you are entitled to a warranty repair. Contact your dealer for that purpose.
Service
If you have questions or if you need additional information, please let us know. You can contact our
support team via email at: service@petromax.de.
8