Displays And Pushbuttons; Functions - Becker SunWindControl SWC441 Notice De Montage Et D'utilisation

Assembly and Operating Instructions

Displays and pushbuttons

MAN/AUTO Sliding Switch
When the sliding switch is set to
DOWN pushbutton commands) are executed and an alarm signal (e.g.: wind
alarm if wind sensor is integrated) given.
When the sliding switch is set to
(e.g. sun protection function, ...).
The automatic sun protection functions are interrupted if a manual operation is
executed during automatic mode. These functions are re-activated automati-
cally when the programmed threshold values are exceeded or undercut after
retraction or via switching the slide switch from "S" to "H" and back to "S".
16
Sliding Switch
RETRACT button
STOP pushbutton
EXTEND button
Battery compartment
Setting aid
Wind threshold control switch
Sun threshold control switch
Programming pushbutton
Transmission control light

Functions

, manual control commands (e.g.: UP, STOP,
, automatic control commands are executed