Domo DO9105W Mode D'emploi page 26

DO9105W - DO9108W
ZERO (Z) OR TARE (T) FUNCTION
You can weigh different items consecutively without removing any items from the
scale.
1. Place the first item onto the weighing platform and read the weight.
2. Press the Z/T button, so that the display indicates «0». The scale could also first
display «----», followed by «0».
3. Now place the next item onto the weighing platform to read the weight of this
item.
This means you can first place a bowl on the scale, press the Z/T button and then
add ingredients into the bowl. This way you can only weigh the ingredients.
Zero function (O): when the total sum of all items is smaller than or equal to 4% of
the maximum capacity (10 kg). The maximum capacity remains unchanged.
Tare function (T): when the total sum of all items is larger than 4% of the maximum
capacity (10 kg). The maximum weighing capacity is reduced by the total weight of
all items.
WEIGHING VOLUME
1. Place the scale on a stable and flat surface.
2. Press the MODE button to switch from time mode to weighing mode. The display
will indicate «0».
3. Make sure that the scale is set to volume mode, not weighing mode. If this is not
the case, press the UNIT button shortly to change.
4. Place a bowl, cup,... onto the weighing platform to catch the liquid.
5. Press the Z/T button to set the weight to zero.
6. Now pour the water or milk into the bowl, cup,... The LCD display will indicate
the volume of the liquid.
ALARM/TIMER
1. Press the T-SET button and use the arrows to set the desired time (maximum timer
time: 99:55). Confirm with the T-SET button.
2. After setting the time, press the T-SET button to start the countdown. If you want
to cancel the countdown prematurely: press the T-SET button.
3. The timer will count down to 00:00, after which an alarm signal will go off 60
times. After the signal, the scale will automatically return to the time mode.
4. Press any button to stop the alarm signal.
26