Focus Mode - Focal Professional TRIO11 BE Manuel D'utilisation

TRIO11 BE
™
U s e r m a n u a l
24

FOCUS MODE

6 - INPUT
This input is for connecting the footswitch controller or for receiving the signal from the OUTPUT of the
FOCUS mode of a Trio11 Be monitor.
7 - OUTPUT
This output is for connecting a Trio11 Be monitor to another Trio11 Be monitor.
Make sure you use an instrument-type cable with 2x 6.35 mm mono jacks to connect the footswitch to a
Trio11 Be, and to connect two Trio11 Be monitors.
TRIO11 BE TRIO11 BE