Unpacking And Assembly Of The Filter Unit - Iso KEMPER MaxiFil Mode D'emploi

KEMPER MaxiFil stationary - operating instructions- EN

5.1 Unpacking and assembly of the filter unit

Open the carton (item 1) and remove the OSB-board (item 4).
Remove the control box (item 6), the adapter (item 5), the sound absorber
(item 2) and both cable ducts (item 3) from the carton (item 1).
Remove both edge protection profiles (item 7) and then remove the carton
(item 1).
- 64 –
Technical modifications and errors expected.