Safety; General Remarks; Notes On Signs And Symbols - Iso KEMPER MaxiFil Mode D'emploi

2 Safety

2.1 General Remarks

The MaxFil is of state-of-the-art construction and built in accordance with safety-
technical rules. When operating the MaxiFil, hazards for the operator or impairment
of the MaxiFil as well as other property may occur, if
It is not operated by trained or instructed personnel,
It is not used for the purpose intended and / or
It is not properly maintained.

2.2 Notes on Signs and Symbols

HAZARD
This is a warning against an immediate hazardous situation with an
inevitable consequence of most severe injuries or death if the
designated instruction is not followed exactly.
WARNING
Draws attention to a potentially dangerous situation that could result in
severe personal injury or death if the specified instruction is not
followed exactly.
CAUTION
This is a warning of a potentially dangerous situation with the result of
moderate or minor injuries and property damage if the specified
instruction is not followed exactly.
INFORMATION
This is an indication of useful information for safe and proper handling.
The bullet point marks work and / or operating steps in a sequence. The
steps are to be carried out in this order from top to bottom.
The dash marks lists.
KEMPER MaxiFil stationary - operating instructions- EN
- 52 –
Technical modifications and errors expected.