Design Features - Rockford Fosgate Prime R2-200X2 Mode D'emploi

Design Features

Punch EQ - Variable
Equalizer with up to +18dB @ 45Hz.
(Only available on mono channels)
See Pg. 11
Power/Protect LED
Power LED illuminates BLUE
when the unit is turned
on. Protect/Thermal LED
illuminates RED when
amplifier overheats or short
circuits. The amplifier will
automatically mute if this
occurs.
Auto Remote Turn ON
When in the ON position, the
amp will use signal sense (DC
Offset) to turn the amp ON.
When in the OFF position, you
will need to wire the Remote
Turn ON input.
Note: Signal sense only works
with/when using high level
inputs.
6
Variable Crossover
A built-in 12dB/octave Butterworth filter with a
crossover point variable from 50Hz to 250Hz. All Mono
amps (R2-250X1, R2-500X1, R2-750X1 & R2-1200X1)
utilize a 24dB/octave.
See Pg. 11
Power/REM Terminals*
The Power and Ground Terminals are
nickel-plated set-screw wire connectors
that will accommodate up to 4 AWG. The
REM Terminal will accommodate up to 8
AWG.
Infra-Sonic
A 12dB filter to prevent frequencies
below the audio range from being
applied to the sub woofer from
the amplifier giving you better
performance, particularly in vented
(ported) enclosures.
See Pg. 11
Speaker Terminals*
The heavy duty, nickel-plated set
screw wire connectors (+ and -)
that will accommodate up to 8
AWG.
*All terminals use a 3mm
Allen wrench that is included
with each amp.
illus.-2.1