Storage
• Before storage, always make sure the appliance
has already been disconnected from the electri-
cal outlet and cooled down completely.
Troubleshooting
If the appliance does not function properly, please check the below table for the solution. If you are still
unable to solve the problem, please contact the supplier/service provider.
Problems
The appliance does not switch on.
Cooling fan is operating even after the
appliance is switched off
Technical specification
Item no.: 209523
Operating voltage and frequency: 220-240V~ 50/60Hz
Rated input power: 1000W
Temperature setting: 40°C ~ 100°C (5°C interval,
without 55°C and 60°C)
Remark: Technical specification is subjected to change without prior notification
Product Information Requirements
Type of hob
Number of cooking zones
Heating technology (induction cooking zones and
cooking areas, radiant cooking zones, solid plates)
For circular cooking zones or area: diameter of
useful surface area per electric heated cooking
zone, rounded to the nearest 5 mm.
For non-circular cooking zones or area: useful
surface area per electric heated cooking zone,
rounded to the nearest 5 mm.
Energy consumption per cooking zone or area cal-
culated per kg
Energy consumption for the hob calculated per kg
• Store the appliance in a cool, clean and dry place.
• Never put objects on the heating surface as it
may crack the surface.
Possible cause
- Power plug is not connected proper-
ly with the electrical outlet.
- Knob is not rotated.
- This is normal. The cooling fan con-
tinues running for some time to cool
down all internal elements.
Protection class: class I
Dimension: 455 x 333 x (H) 62 mm
Induction warming plate
1
Induction cooking zones
Symbol
Length &
Width
EC electric
cooking
EC electric hob
Possible solution
- Check the power plug to make sure
it is connected properly.
- Rotate the knob to switch on the
appliance.
- Wait until the cooling fan stops op-
erating.
Value
Ø
Not applicable
350 (L) x
250 (W)
< 200
< 200
EN
Unit
mm
mm
Wh/kg
Wh/kg
7