Electrical Safety; Special Safety Instructions For That Machine - Zipper Maschinen ZI-RMM95 Mode D'emploi

 Choose a level, vibration-free, non-slip surface for the installation location.
 Ensure sufficient space around the machine!
 Ensure sufficient lighting conditions at the workplace to avoid stroboscopic effects!
 Only use perfect tools that are free of cracks and other defects (e.g. deformations).
 Remove setting tools from the machine before switching on.
 Keep the area around the machine free of obstacles (e.g. dust, chips, cut workpiece parts
etc.).
 Check the strength of the machine connections before each use.
 Never leave the running machine unattended. If necessary, stop the machine before
leaving.
 The machine may only be operated, serviced or repaired by persons who are familiar with
it and who have been informed of the dangers arising in the course of this work.
 Ensure that unauthorised persons maintain an appropriate safety distance from the
machine and keep children away from the machine in particular.
 Wear suitable protective equipment (ear protection, gloves when handling tools) as well as
close-fitting work protective clothing - never wear loose clothing, ties, jewellery etc. -
danger of being drawn in!
 Hide long hair under hair protection.
 Always work with care and the necessary caution and never use excessive force.
 Do not overload the machine!
 Do not work on the machine if it is tired, not concentrated or under the influence of
medication, alcohol or drugs!
 Do not use the machine in areas where vapours from paints, solvents or flammable liquids
represent a potential danger (danger of fire or explosion!).
 Make sure that the ON/OFF switch is in the "OFF" position before connecting the machine
to the power source.
 Do not use the power tool if it cannot be switched on and off with the ON/OFF switch.
 Ensure that the unit is earthed.
 Only use suitable extension cords.
 Always shut down the machine before carrying out any conversion, adjustment,
measuring, cleaning, maintenance or repair work and always disconnect it from the power
supply for maintenance or repair work. Before starting any work on the machine, wait until
all tools or machine parts have come to a complete standstill and secure the machine
against unintentional restarting

Electrical Safety

 Proper plugs and matching sockets reduce the risk of electric shock. The plug of the power
tool must be adapted to the socket. Never modify the plug in any way. Do not use adapter
plugs with earthed power tools.
 There is an increased risk of electric shock if your body is in ground contact. Avoid physical
contact with earthed objects, such as pipes, radiators, etc.
 Water that penetrates power tools increases the risk of electric shock. Do not expose the
power tools to rain or moisture.
 A damaged or tangled cable increases the risk of electric shock. Handle the cable with
care. Never use the cable to carry, pull or disconnect the power tool. Keep the cable away
from heat, oil, sharp edges or moving parts.
 If you are using an outdoor power tool, use an extension cord suitable for outdoor use!
 Use of the power tool in a humid environment is only permitted if the power source is
protected by a residual current circuit breaker.
 Do not use the power tool if it cannot be switched on and off with the ON-OFF switch.

Special Safety instructions for that machine

 Keep away from the machine when operating any of the foot pedals! Take especially care to
keep hands off the tyre plate area and keep the feet off the bed-breaking device
 Never exceed the recommended max. tyre pressure of the tyre manufacturer.
 Always check tyre, rim and tyre position on rim before and during inflating process.
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
ZI-RMM95
SAFETY
21