Tools; Information; Factory Setting; Upgrade Via Rs232 - König Electronic SAT-SDHD50-KN Mode D'emploi

4.

Tools

1. Press OK or to pop up the "Input Password"
dialog, you cannot enter the menu unless the correct
password is entered. The default password is 0000.
2. Press PR+, PR- to move the cursor up or down.
3. Press EXIT or
4.1

Information

Press OK to enter the Information window.
4.2

Factory Setting

Press OK to enter into the Factory Setting window. Select
Yes and press OK to return to the factory settings. All
searched channels and set information will be erased.
Select No and press OK to cancel this operation, or press
MENU or EXIT to cancel and exit.
4.3

Upgrade Via RS232

1. Press to select between All Codes, Main
Code, Card, Radio Back, Key Date Default db, User
db. The default option is All Codes.
2. Press OK at the Start position to start checking via a
serial port.
4.4

Common Interface

There are many types of CI. For example Conax access. Press OK to enter the main menu. You
can show information about Product Ordering, Subscription Status, PPV Status, Token Status and
so on.
to move the cursor to the left menu.
20