Installation; Antenna Connection; Satellite List - König Electronic SAT-SDHD50-KN Mode D'emploi

2.

Installation

Press OK or to pop up the "Input Password"
dialog, you cannot enter the menu unless the
correct password is entered. The default password
is "0000".
Press PR+, PR- to move the cursor up or down.
Press EXIT or to move the cursor to the left
menu.
2.1

Antenna Connection

Press to select between Motor Antenna and
Fixed Antenna.
2.2

Satellite List

Press PR+, PR- to select the satellite up or down.
Press OK to select and mark, and press OK again
to cancel the selection and the mark.
If there is no satellite, the red coloured and blue
coloured keys will be invalid.
1. Press the red coloured key to pop up the Edit
Satellite window. Press PR+, PR- to move cursor
up or down.
Name: User numeric keys to change the name of
the satellite; please refer to Edit Channel Name.
Longitude: Press
longitude and west longitude. After pressing OK,
use numeric keys to edit the longitude, press
EXIT or PR+, PR- to exit editing mode. The
range of the longitude is from 1 to 180 degrees.
If beyond this range, the system will inform
you "out of range" when you press the yellow
coloured key on the remote control. After setting,
press the yellow coloured key to save and exit,
while pressing the blue coloured key to exit
without saving.
to toggle between east
12