Memory Function; Cleaning - Agu IHE3 Eaglet Mode D'emploi

MEMORY FUNCTION

You can recall up to 10 stored measurements in memory to share with your
physician or trained healthcare professional.
1
Press the Memory button. The first reading displayed is the latest meas-
urement stored in memory.
2 Continue to press the Memory button to view the next previously stored
measurement.
3
Any new measurement will be recorded and the oldest memory deleted
without you having to do anything.
When the Memory function is activated, the icon
10

CLEANING

ATTENTION
Do not use chemically active agents to clean the device.
Disinfecting agents can be used in the home.
Lens/Measurement sensor: in case of contamination of the infrared ther-
the lens surface should be crystal clear. As the lens surface gets cool
when the disinfectant solution evaporates, the thermometer should be left
for several minutes at room temperature before use after cleaning.
Thermometer: сlean with a soft, dry
cloth. Do not use water to rinse the
device.
62
will be displayed.
mometer sensor lens, the readings
begin to change immediately as some-
thing interferes with the measurement
(usually the readings are too low). To
eliminate this problem, it is enough to
wipe the sensor with a soft lint-free
cloth (or cotton swab) moistened with
disinfectant solution. Then it is neces-
sary to wipe the lens with a dry soft lint-
free cloth. After the cleaning procedure,