Agu IHE3 Eaglet Mode D'emploi page 59

MEASURING BODY TEMPERATURE IN TEMPLE AREA
1
The cap should be in position on the probe nozzle.
2 Press the Power/Measure button.
Following a successful self-test,
the device emits beep sound.
3
At the moment of switching on, all the
icons are displayed on the display, after
which the thermometer switches to the
previous measurement mode (digital and
light indication) and the device is ready for
operation.
5
Press the Power/Measure button and hold the probe flat on the area
described above. You'll hear a beep and your temperature will come up
on the screen.
6
Read the recorded temperature from the LCD display. The backlight
shows red for fever or green for normal.
EN
4
Touch the probe gently on the skin of
upper right of right eyebrow or the upper
left of left eyebrow. If the skin area is
covered with hair, sweat or dirt, please
remove the obstacle beforehand to
improve the reading accuracy.
59